台电创意u盘修复工具

台电创意u盘3.0修复工具是一款台电创意u盘的量产工具，假如你的台电创意u盘出现内存不足的状况可以试一试用这款软件修复，这款u盘数据还很好，能达到3.0，就是很不稳定。假如你的u盘损毁可以来西西下载这款软件。

故障码：

11:Open Execute File error!;

12:Cant support NAND Function!;

13:Send Execute CMD fail!;

14:Check busy after Send Execute CMD!;

15:Cant support NFTL Function!;

16:Device Setup already, please erase first!;

17:Cant support LED Function!;

18:Check busy after Execute step!;

19:Send GetMap CMD fail!;

20:Return Channel not match!;

21:Return Bank not match!;

22:Return SizeofIDCode not match!;

23:Return Flash ID not match!;

24:Check busy after TestGetMap Step!;

25:TestConfig Send IODriving|CMD fail!;

26:TestConfig Send SET|ECC|CMD fail!;

27:TestConfig Send SET|ACTiming|CMD fail!;

28:TestConfig Send ConfigDevice|CMD fail!;

29:TestConfig Send ConfigDevice|CMD fail!;

30:Check busy after Send ConfigDevice|CMD!;

31:Check busy after Test Config Step!;

32:TestScanINIDFT Send CMD fail!;

33:Check busy after TestScanINIDFT Step!;

34:TestReadPhysical Send CMD fail!;

35:TestCopy Send Init|NFTL CMD fail!;

36:Check busy after Initial NFTL!;

37:TestCopy Write fail!;

38:TestCopy Read fail!;

39:TestCopy RW Compare fail!;

40:Check busy after TestReadPhysical Step!;

41:TestErase Send CMD fail!;

42:Check busy after TestErase!;

43:Open USB FW File error!;

44:Open SATA FW File error!;

45:Send Write FW/Info CMD fail!;

46:Check busy after Send Write FW/Info CMD!;

47:Send Read FW/Info CMD fail!;

48:Check busy after RW Info and FW!;

49:Verify Info fail!;

50:Write Descriptor fail!;

51:Cant support Partition Function!;

52:The Supported System IDs is incomplete!;

53:open Image file fail!;

54:Set Partition Fail!;

55:Send Write Partition CMD fail!;

56:Write CD|ROM partition fail!;

57:Send ReadCapacity CMD fail!;

58:Send Init|NFTL CMD fail!;

59:Send Write Partition CMD fail!;

60:Check busy after Partition!;

61:Check busy after Copy Test!;

62:This Format type not support!;

63:This Windows version not support!;

64:Cant get Diskletter!;

65:Write Label name fail!;

66:TestFormat fail!;

67:Check busy after Format!;

68:TestExecute ReInitial|Erase fail!;

69:Inquiry Fail!;

70:Cant Initial device , now run FW!;

71:Check busy after Re|Initial erase Fail!;

72:TestExecute STOP NFTL fail!;

73:Send LEDC CMD fail!;

74:TestFormat verify BPB fail!;

75:Lock Disk fail!;

76:UnLock Disk fail!;

77:Get lock handle fail!;

78:Get Total Sectors fail!;

79:Open PC FW File error!;

80:TestReadPhysical bad block over default setting!;

81:TestReadPhysical Info|Block is bad!;

82:Execute File not found!;

83:TestReadPhysical Total size not enough!;

84:TestReadPhysical Get total block too much!;

85:TestFormat Create MBR error!;

86:TestFormat Verify MBR fail!;

87:Read Capacity fail!;

88:Enable Optitmize for Performance fail!;

89:Relink drive fail!;

90:Disk size small than Media Partition!;

91:Disk size small than Force capacity!;

92:Cant support TEPF Function!;

93:Refresh device fail!;

94:Send Terminate CMD fail!;

95:Check Unit Ready Timeout!;

96:Innostor unlock CMD fail!;

97:Innostor lock CMD fail!;

98:Get Serial number fail!;

99:Cant find good block to write FW!;

100:Cant find good block to write Info!;

101:TestConfig CT value error!;

102:Hidden size incorrect!;

103:Preload File Fail!;

104:Can not find default Stor|String!;

105:Write Info|Table fail!;

106:Get Parameter fail!;

107:Get Flash vendor fail!;

108:Get Driving setting fail!;

109:Can not Get File system!;

110:Check Innostor device fail!;

111:Check Preload files fail!;

112:Cluster size not match!;

113:Serial number over setting!;

114:Not support ISF!;

115:Set Permissions fail!;

116:Can not support this version OS!;

117:Not support this controller!;

118:Support ISF Only!;

119:Bad Block too much!;

120:Serial number length not match!;

121:Set parameter fail!;

122: Device size over range!;

300:SORTING|INVALID|HANDLE!;

301:SORTING|SUCCESS!;

302:SORTING|EVENT|FUNCTION|F人工智能L!;

303:SORTING|STATUS|FUNCTION|F人工智能L!;

304:SORTING|SET|PARAMETER|F人工智能L!;

305:SORTING|GET|PARAMETER|F人工智能L!;

306:SORTING|SET|PATTERN|F人工智能L!;

307:SORTING|SET|TABLE|F人工智能L!;

308:SORTING|ERASE|F人工智能L!;

309:SORTING|WRITE|F人工智能L!;

310:SORTING|READ|COMPARE|F人工智能L!;

311:SORTING|GET|RESULT|F人工智能L!;

312:SORTING|NOT|TLC|FALSH!;

313:SORTING|FLASH|POWER|ONOFF|F人工智能L!;

314:SORTING|SET|FEATURE|F人工智能L!;

315:SORTING|SET|BMT|F人工智能L!;

316:SORTING|BAD|BLOCKS|TOO|MUCH!;

317:SORTING|NOT|SUPPORT|MULTI|CHANNEL|MULTI|BANK!;

318:SORTING|SORTING|DATA|LENGTH|MISMATCH!;

319:SORTING|SORTING|SET|ALPHA|TABLE|F人工智能L!;

320:SORTING|VERIFY|IDBT|F人工智能L!;

321:SORTING|QUICK|PARAMETER|F人工智能L!;

322:SORTING|SORTING|INVLIAD|SORTING|LEVEL!;

TAG标签：量产工具(7)U盘修复(3)

转载请说明来源于谷普下载站（https://www.muerya.com）

本文地址：https://www.muerya.com/soft/13358.html

郑重声明：文章来源于网络作为参考，本站仅用于分享不存储任何下载资源,如果网站中图片和文字侵犯了您的版权，请联系我们处理！邮箱3450399331@qq.com